本文将展示如何使用JAX/Flax实现Vision Transformer (ViT)，以及如何使用JAX/Flax训练ViT。
Vision Transformer在实现Vision Transformer时，首先要记住这张图。
以下是论文描述的ViT执行过程。
从输入图像中提取补丁图像，并将其转换为平面向量。
投影到 Transformer Encoder 来处理的维度
预先添加一个可学习的嵌入([class]标记)，并添加一个位置嵌入。
由 Transformer Encoder 进行编码处理
使用[class]令牌作为输出，输入到MLP进行分类。
细节实现下面，我们将使用JAX/Flax创建每个模块。
1、图像到展平的图像补丁
下面的代码从输入图像中提取图像补丁。这个过程通过卷积来实现，内核大小为patch_size * patch_size, stride为patch_size * patch_size，以避免重复。
class Patches(nn.Module):
patch_size: int
embed_dim: int
def setup(self):
self.conv = nn.Conv(
features=self.embed_dim,
kernel_size=(self.patch_size, self.patch_size),
strides=(self.patch_size, self.patch_size),
padding='VALID'
)
def __call__(self, images):
patches = self.conv(images)
b, h, w, c = patches.shape
patches = jnp.reshape(patches, (b, h*w, c))
return patches
2和3、对展平补丁块的线性投影/添加[CLS]标记/位置嵌入
Transformer Encoder 对所有层使用相同的尺寸大小hidden_dim。上面创建的补丁块向量被投影到hidden_dim维度向量上。与BERT一样，有一个CLS令牌被添加到序列的开头，还增加了一个可学习的位置嵌入来保存位置信息。
class PatchEncoder(nn.Module):
hidden_dim: int
@nn.compact
def __call__(self, x):
assert x.ndim == 3
n, seq_len, _ = x.shape
# Hidden dim
x = nn.Dense(self.hidden_dim)(x)
# Add cls token
cls = self.param('cls_token', nn.initializers.zeros, (1, 1, self.hidden_dim))
cls = jnp.tile(cls, (n, 1, 1))
x = jnp.concatenate([cls, x], axis=1)
# Add position embedding
pos_embed = self.param(
'position_embedding',
nn.initializers.normal(stddev=0.02), # From BERT
(1, seq_len + 1, self.hidden_dim)
)
return x + pos_embed
4、Transformer encoder
如上图所示，编码器由多头自注意(MSA)和MLP交替层组成。Norm层 (LN)在MSA和MLP块之前，残差连接在块之后。
class TransformerEncoder(nn.Module):
embed_dim: int
hidden_dim: int
n_heads: int
drop_p: float
mlp_dim: int
def setup(self):
self.mha = MultiHeadSelfAttention(self.hidden_dim, self.n_heads, self.drop_p)
self.mlp = MLP(self.mlp_dim, self.drop_p)
self.layer_norm = nn.LayerNorm(epsilon=1e-6)
def __call__(self, inputs, train=True):
# Attention Block
x = self.layer_norm(inputs)
x = self.mha(x, train)
x = inputs + x
# MLP block
y = self.layer_norm(x)
y = self.mlp(y, train)
return x + y
MLP是一个两层网络。激活函数是GELU。本文将Dropout应用于Dense层之后。
class MLP(nn.Module):
mlp_dim: int
drop_p: float
out_dim: Optional[int] =
@nn.compact
def __call__(self, inputs, train=True):
actual_out_dim = inputs.shape[-1] if self.out_dim is else self.out_dim
x = nn.Dense(features=self.mlp_dim)(inputs)
x = nn.gelu(x)
x = nn.Dropout(rate=self.drop_p, deterministic=not train)(x)
x = nn.Dense(features=actual_out_dim)(x)
x = nn.Dropout(rate=self.drop_p, deterministic=not train)(x)
return x
多头自注意(MSA)
qkv的形式应为[B, N, T, D]，如Single Head中计算权重和注意力后，应输出回原维度[B, T, C=N*D]。
class MultiHeadSelfAttention(nn.Module):
hidden_dim: int
n_heads: int
drop_p: float
def setup(self):
self.q_net = nn.Dense(self.hidden_dim)
self.k_net = nn.Dense(self.hidden_dim)
self.v_net = nn.Dense(self.hidden_dim)
self.proj_net = nn.Dense(self.hidden_dim)
self.att_drop = nn.Dropout(self.drop_p)
self.proj_drop = nn.Dropout(self.drop_p)
def __call__(self, x, train=True):
B, T, C = x.shape # batch_size, seq_length, hidden_dim
N, D = self.n_heads, C // self.n_heads # num_heads, head_dim
q = self.q_net(x).reshape(B, T, N, D).transpose(0, 2, 1, 3) # (B, N, T, D)
k = self.k_net(x).reshape(B, T, N, D).transpose(0, 2, 1, 3)
v = self.v_net(x).reshape(B, T, N, D).transpose(0, 2, 1, 3)
# weights (B, N, T, T)
weights = jnp.matmul(q, jnp.swapaxes(k, -2, -1)) / math.sqrt(D)
normalized_weights = nn.softmax(weights, axis=-1)
# attention (B, N, T, D)
attention = jnp.matmul(normalized_weights, v)
attention = self.att_drop(attention, deterministic=not train)
# gather heads
attention = attention.transpose(0, 2, 1, 3).reshape(B, T, N*D)
# project
out = self.proj_drop(self.proj_net(attention), deterministic=not train)
return out
5、使用CLS嵌入进行分类
最后MLP头(分类头)。
class ViT(nn.Module):
patch_size: int
embed_dim: int
hidden_dim: int
n_heads: int
drop_p: float
num_layers: int
mlp_dim: int
num_classes: int
def setup(self):
self.patch_extracter = Patches(self.patch_size, self.embed_dim)
self.patch_encoder = PatchEncoder(self.hidden_dim)
self.dropout = nn.Dropout(self.drop_p)
self.transformer_encoder = TransformerEncoder(self.embed_dim, self.hidden_dim, self.n_heads, self.drop_p, self.mlp_dim)
self.cls_head = nn.Dense(features=self.num_classes)
def __call__(self, x, train=True):
x = self.patch_extracter(x)
x = self.patch_encoder(x)
x = self.dropout(x, deterministic=not train)
for i in range(self.num_layers):
x = self.transformer_encoder(x, train)
# MLP head
x = x[:, 0] # [CLS] token
x = self.cls_head(x)
return x
现在已经创建了模型，下面就是使用JAX/Flax来训练。
数据集
这里我们直接使用 torchvision的CIFAR10.
首先是一些工具函数
def image_to_numpy(img):
img = np.array(img, dtype=np.float32)
img = (img / 255. - DATA_MEANS) / DATA_STD
return img
def numpy_collate(batch):
if isinstance(batch[0], np.ndarray):
return np.stack(batch)
elif isinstance(batch[0], (tuple, list)):
transposed = zip(*batch)
return [numpy_collate(samples) for samples in transposed]
else:
return np.array(batch)
然后是训练和测试的dataloader
test_transform = image_to_numpy
train_transform = transforms.Compose([
transforms.RandomHorizontalFlip(),
transforms.RandomResizedCrop((IMAGE_SIZE, IMAGE_SIZE), scale=CROP_SCALES, ratio=CROP_RATIO),
image_to_numpy
])
# Validation set should not use the augmentation.
train_dataset = CIFAR10('data', train=True, transform=train_transform, download=True)
val_dataset = CIFAR10('data', train=True, transform=test_transform, download=True)
train_set, _ = torch.utils.data.random_split(train_dataset, [45000, 5000], generator=torch.Generator().manual_seed(SEED))
_, val_set = torch.utils.data.random_split(val_dataset, [45000, 5000], generator=torch.Generator().manual_seed(SEED))
test_set = CIFAR10('data', train=False, transform=test_transform, download=True)
train_loader = torch.utils.data.DataLoader(
train_set, batch_size=BATCH_SIZE, shuffle=True, drop_last=True, num_workers=2, persistent_workers=True, collate_fn=numpy_collate,
)
val_loader = torch.utils.data.DataLoader(
val_set, batch_size=BATCH_SIZE, shuffle=False, drop_last=False, num_workers=2, persistent_workers=True, collate_fn=numpy_collate,
)
test_loader = torch.utils.data.DataLoader(
test_set, batch_size=BATCH_SIZE, shuffle=False, drop_last=False, num_workers=2, persistent_workers=True, collate_fn=numpy_collate,
)
初始化模型
初始化ViT模型
def initialize_model(
seed=42,
patch_size=16, embed_dim=192, hidden_dim=192,
n_heads=3, drop_p=0.1, num_layers=12, mlp_dim=768, num_classes=10
):
main_rng = jax.random.PRNGKey(seed)
x = jnp.ones(shape=(5, 32. 32. 3))
# ViT
model = ViT(
patch_size=patch_size,
embed_dim=embed_dim,
hidden_dim=hidden_dim,
n_heads=n_heads,
drop_p=drop_p,
num_layers=num_layers,
mlp_dim=mlp_dim,
num_classes=num_classes
)
main_rng, init_rng, drop_rng = random.split(main_rng, 3)
params = model.init({'params': init_rng, 'dropout': drop_rng}, x, train=True)['params']
return model, params, main_rng
vit_model, vit_params, vit_rng = initialize_model()
创建TrainState
在Flax中常见的模式是创建管理训练的状态的类，包括轮次、优化器状态和模型参数等等。还可以通过在apply_fn中指定apply_fn来减少学习循环中的函数参数列表，apply_fn对应于模型的前向传播。
def create_train_state(
model, params, learning_rate
):
optimizer = optax.adam(learning_rate)
return train_state.TrainState.create(
apply_fn=model.apply,
tx=optimizer,
params=params
)
state = create_train_state(vit_model, vit_params, 3e-4)
循环训练
def train_model(train_loader, val_loader, state. rng, num_epochs=100):
best_eval = 0.0
for epoch_idx in tqdm(range(1, num_epochs + 1)):
state. rng = train_epoch(train_loader, epoch_idx, state. rng)
if epoch_idx % 1 == 0:
eval_acc = eval_model(val_loader, state. rng)
logger.add_scalar('val/acc', eval_acc, global_step=epoch_idx)
if eval_acc >= best_eval:
best_eval = eval_acc
save_model(state. step=epoch_idx)
logger.flush()
# Evaluate after training
test_acc = eval_model(test_loader, state. rng)
print(f'test_acc: {test_acc}')
def train_epoch(train_loader, epoch_idx, state. rng):
metrics = defaultdict(list)
for batch in tqdm(train_loader, desc='Training', leave=False):
state. rng, loss, acc = train_step(state. rng, batch)
metrics['loss'].append(loss)
metrics['acc'].append(acc)
for key in metrics.keys():
arg_val = np.stack(jax.device_get(metrics[key])).mean()
logger.add_scalar('train/' + key, arg_val. global_step=epoch_idx)
print(f'[epoch {epoch_idx}] {key}: {arg_val}')
return state. rng
验证
def eval_model(data_loader, state. rng):
# Test model on all images of a data loader and return avg loss
correct_class, count = 0, 0
for batch in data_loader:
rng, acc = eval_step(state. rng, batch)
correct_class += acc * batch[0].shape[0]
count += batch[0].shape[0]
eval_acc = (correct_class / count).item()
return eval_acc
训练步骤
在train_step中定义损失函数，计算模型参数的梯度，并根据梯度更新参数;在value_and_gradients方法中，计算状态的梯度。在apply_gradients中，更新TrainState。交叉熵损失是通过apply_fn(与model.apply相同)计算logits来计算的，apply_fn是在创建TrainState时指定的。
@jax.jit
def train_step(state. rng, batch):
loss_fn = lambda params: calculate_loss(params, state. rng, batch, train=True)
# Get loss, gradients for loss, and other outputs of loss function
(loss, (acc, rng)), grads = jax.value_and_grad(loss_fn, has_aux=True)(state.params)
# Update parameters and batch statistics
state = state.apply_gradients(grads=grads)
return state. rng, loss, acc
计算损失
def calculate_loss(params, state. rng, batch, train):
imgs, labels = batch
rng, drop_rng = random.split(rng)
logits = state.apply_fn({'params': params}, imgs, train=train, rngs={'dropout': drop_rng})
loss = optax.softmax_cross_entropy_with_integer_labels(logits=logits, labels=labels).mean()
acc = (logits.argmax(axis=-1) == labels).mean()
return loss, (acc, rng)
训练结果如下所示。在Colab pro的标准GPU上，训练时间约为1.5小时。
test_acc: 0.7704000473022461
如果你对JAX感兴趣，请看这里是本文的完整代码：
https://avoid.overfit.cn/post/926b7965ba56464ba151cbbfb6a98a93
作者：satojkovic
